Limited lifetime Warranty
Extreme Led All Round Stern Light Warranty
MAX IT OUT LEDS warrants to the original consumer-purchaser that MAX IT OUT LEDS 's consumer products will be free from defective materials or workmanship, and that the Products installed as original equipment by a boat builder or manufacturer are Limited Lifetime.
When MAX IT OUT LEDS is supplied with original purchase documentation.
ALL IMPLIED WARRANTIES, INCLUDING MERCHANTABILITY, ARE ALSO LIMITED IN DURATION TO LIMITED LIFETIME PERIOD TO THE ORIGINAL PURCHASER.
MAX IT OUT LEDS SHALL NOT BE LIABLE FOR LOSS OF USE OF ANY OF ITS CONSUMER PRODUCTS, NOR FOR OTHER INCIDENTAL OR CONSEQUENTIAL COSTS, EXPENSES, OR DAMAGES INCURRED BY THE ORIGINAL CONSUMER-PURCHASER OR BY ANY OTHER PERSON.
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LAST, SO THE ABOVE LIMITATION MAY OR MAY NOT APPLY TO YOU. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE EXCLUSION MAY OR MAY NOT APPLY TO YOU.
-+
Extreme Led All Round Stern Light Warranty is void if not properly installed to allow the light shaft to rotate to a 90 degree angle if impacted by a object or debris - mounting on top rear corner of transom is one recommended location. If mounted improperly and not allowing the mount to rotate completely horizontal will void any or all limited warranties.
This warranty is void if the consumer product warranted has been damaged by accident or unreasonable use, neglect, improper service, or other causes not arising out of defects in material or workmanship. Excluded from this warranty are Electric Connectors.
Preferably follow below to make payment to get a replacement or repair parts quickly
Original consumer-purchaser,
For warranty claims :
Model 002-WW-12 ( 3/8 OD shaft)
Not Serviceable
Send PayPal payment to rdeven@swbell.net for $30.00
and we will ship replacement light shaft portion.
To Repair
Model 003/004-WW-13 (serviceable LED) -1/2 OD shaft - started shipping April 2021
If light is burnt out -$4.00 for light repair kit : button below
If broken or any other damage contact email above for process to purchase replacement.
To replace LED module the use of Utility Knife and Heat Gun.
If you dont feel comfortable to do the repair below, you can ship light back for repair:
48 Hickory Bluff Ln, Arnold, MO 63010
Repair kit is 2 new design unbreakable hard tops, 2 led units, small paper clip ( to clear any corrosion from Led socket), heat glue and heat shrink needed to get the light working again.
Step 1) You need to score the heat shrink with a utility knife the apply heat and remove all the coverings then heat the top hard cover to remove.
You can do this now and hang the light inside upside down to allow any moisture to dissipate while the repair kit is on its way to you.
Led module has brass pins now so they wont corrode, if your light had moisture in it the old led had metal pins, so make sure to.
Step 2) clear the pin holes in the socket with paper clip provided if there was rusty color in your light.
Step 3) Connect light back to power connection on boat and turn on switch to properly index polarity when you plug in new LED module making sure it LED lights up before proceeding to next step.
Step 4)Then unplug light and heat and apply more heat glue on the black shaft just below the led module.
Step 5 )Then heat the glue well with the heat gun the firmly push the new hard clear top on and hold till it cools. You can now place the new black shrink over the base of hard clear top and shaft like it was originally then heat to shrink.
Email : warranty@maxitoutleds.com
Replacement or repaired product will have warranty of ninety (90) days.
Important:For this Warranty to be effective MAX IT OUT LEDS must be supplied with a dated Proof-Of-Purchase of the product.
MAX IT OUT LEDS does not authorize any person or company to create for it any other obligation or liability in connection with any of its products.
MAX IT OUT LEDS warrants to the original consumer-purchaser that MAX IT OUT LEDS 's consumer products will be free from defective materials or workmanship, and that the Products installed as original equipment by a boat builder or manufacturer are Limited Lifetime.
When MAX IT OUT LEDS is supplied with original purchase documentation.
ALL IMPLIED WARRANTIES, INCLUDING MERCHANTABILITY, ARE ALSO LIMITED IN DURATION TO LIMITED LIFETIME PERIOD TO THE ORIGINAL PURCHASER.
MAX IT OUT LEDS SHALL NOT BE LIABLE FOR LOSS OF USE OF ANY OF ITS CONSUMER PRODUCTS, NOR FOR OTHER INCIDENTAL OR CONSEQUENTIAL COSTS, EXPENSES, OR DAMAGES INCURRED BY THE ORIGINAL CONSUMER-PURCHASER OR BY ANY OTHER PERSON.
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LAST, SO THE ABOVE LIMITATION MAY OR MAY NOT APPLY TO YOU. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE EXCLUSION MAY OR MAY NOT APPLY TO YOU.
-+
Extreme Led All Round Stern Light Warranty is void if not properly installed to allow the light shaft to rotate to a 90 degree angle if impacted by a object or debris - mounting on top rear corner of transom is one recommended location. If mounted improperly and not allowing the mount to rotate completely horizontal will void any or all limited warranties.
This warranty is void if the consumer product warranted has been damaged by accident or unreasonable use, neglect, improper service, or other causes not arising out of defects in material or workmanship. Excluded from this warranty are Electric Connectors.
Preferably follow below to make payment to get a replacement or repair parts quickly
Original consumer-purchaser,
For warranty claims :
Model 002-WW-12 ( 3/8 OD shaft)
Not Serviceable
Send PayPal payment to rdeven@swbell.net for $30.00
and we will ship replacement light shaft portion.
To Repair
Model 003/004-WW-13 (serviceable LED) -1/2 OD shaft - started shipping April 2021
If light is burnt out -$4.00 for light repair kit : button below
If broken or any other damage contact email above for process to purchase replacement.
To replace LED module the use of Utility Knife and Heat Gun.
If you dont feel comfortable to do the repair below, you can ship light back for repair:
48 Hickory Bluff Ln, Arnold, MO 63010
Repair kit is 2 new design unbreakable hard tops, 2 led units, small paper clip ( to clear any corrosion from Led socket), heat glue and heat shrink needed to get the light working again.
Step 1) You need to score the heat shrink with a utility knife the apply heat and remove all the coverings then heat the top hard cover to remove.
You can do this now and hang the light inside upside down to allow any moisture to dissipate while the repair kit is on its way to you.
Led module has brass pins now so they wont corrode, if your light had moisture in it the old led had metal pins, so make sure to.
Step 2) clear the pin holes in the socket with paper clip provided if there was rusty color in your light.
Step 3) Connect light back to power connection on boat and turn on switch to properly index polarity when you plug in new LED module making sure it LED lights up before proceeding to next step.
Step 4)Then unplug light and heat and apply more heat glue on the black shaft just below the led module.
Step 5 )Then heat the glue well with the heat gun the firmly push the new hard clear top on and hold till it cools. You can now place the new black shrink over the base of hard clear top and shaft like it was originally then heat to shrink.
Email : warranty@maxitoutleds.com
Replacement or repaired product will have warranty of ninety (90) days.
Important:For this Warranty to be effective MAX IT OUT LEDS must be supplied with a dated Proof-Of-Purchase of the product.
MAX IT OUT LEDS does not authorize any person or company to create for it any other obligation or liability in connection with any of its products.